Cadenza Riva Diamond
The Cadenza Riva Diamond is a new development based on the Cadenza, with a newly developed midrange driver from Accuton in combination with the 30mm diamond tweeter from Accuton.
This new midrange driver is equivalent to Accuton's 90mm diamond midrange driver with its powerful 1.8 Tesla drive and optimized suspension, only the membrane is made of ceramic instead of diamond.
AudiaZ is the first German manufacturer to use this loudspeaker chassis in series production.
The solidly braced multiplex housing, the best available crossover components, the internal wiring made entirely of pure silver Teflon ribbon cables, as well as the latest and best chassis are the basis for the Cadenza RIVA's outstanding sound with unsurpassed resolution and precise spatial imaging.
The components of the crossover consist of extremely high-quality mica capacitors and film capacitors from Duelund, Intertechnik, Mundorf and BMC.
The entire internal wiring from the pole terminals to the crossover and to all chassis consists of solid pure silver conductors with GORE dielectric made of extruded Teflon.
For the highest demands, the tweeter has a 30 mm diamond dome, the capacitor in front of the tweeter is made of solid pure silver foil with pure silver connections, the cables in the tweeter range consist of a pure silver solid conductor.
The midrange speaker has an extremely powerful 1.8 Tesla motor and a newly developed fabric suspension.
Cadenza Riva Diamond Specifications
Principle
3 way, bass reflex
Chassis
Tweeter 30 mm diamond membrane
Midrange 90 mm ceramic membrane
Bass 2x 173 mm ceramic membrane
Efficiency
88.0 dB/W/m (2.83V/1m)
Frequency response
29 Hz to 40 kHz, 200 Hz to 10 kHz plus/minus 1 dB ripple
Nominal impedance
4 Ohms, minimum 3.8 Ohms @ 84Hz
Power amplifier performance
From 50 watts Class A
Connections
WBT pole terminals 0710AG
Dimensions
Width 244mm
Height 1120mm
Depth 244 mm
Weight
38kg
Versions
pearl gloss black
​
pearl gloss white
​
golden ebony high gloss