top of page

Cadenza Gen3

The Cadenza Gen3 is the current revised version of the Cadenza with a modified crossover in an improved housing.

The Cadenza Gen3 is a full-range floorstanding loudspeaker with complete Accuton ceramic chassis.

The midrange and tweeter come from the Accuton CELL line.

The midrange speaker requires a separate installation frame, which takes up the lines of the front panel with its dynamic shape and thus acts as a design element. This compact full-range speaker is suitable for medium-sized rooms. The solidly braced multiplex housing, the best available crossover components, the internal wiring made entirely of pure silver Teflon ribbon cables, and the best chassis are the basis for the Cadenza Gen3's outstanding sound with unmatched resolution and precise spatial imaging.

Cadenza Gen 3

The components of the crossover consist of extremely high-quality mica capacitors and film capacitors from Duelund, Intertechnik, Mundorf and BMC.

The entire internal wiring from the pole terminals to the crossover and to all chassis consists of solid pure silver conductors with GORE dielectric made of extruded Teflon.

The Cadenza Gen3 has a revised crossover and is equipped with high-quality metal foil resistors. The enclosure has been modified to improve insulation in the bass range.

chassis
Measured values
Measuring room

Cadenza Gen3 Specifications

Principle

3 way, bass reflex

Chassis

Tweeter 30 mm ceramic membrane

Midrange 90 mm ceramic membrane

Bass 2x 173 mm ceramic membrane

Efficiency

87.5 dB/W/m (2.83V/1m)

Frequency response

29 Hz to 40 kHz, 200 Hz to 10 kHz plus/minus 1 dB ripple, measurement diagram created in the low-reflection room of the TH Deggendorf.

Nominal impedance

4 Ohms, minimum 3.8 Ohms @ 84Hz

Power amplifier performance

From 50 watts Class A

Connections

WBT pole terminals 0702 or optionally 0710Ag

Dimensions

Width 244mm

Height 1120mm

Depth 244 mm

Weight

36kg

Versions

pearl gloss black

pearl gloss white

golden ebony high gloss

bottom of page